All The Products


Share to:
sharethis sharing button

Fiberglass Needle Mat for GMT process

E-glass,Binder-free glass fiber mat,Continuous Filament Needle Mat
  • NMS250 ~ 960

  • Tianming

  • 70191500

Fiberglass Needle Mat for GMT Panel

The fiberglass needle mat is a new type of fiberglass reinforced material for composite materials.

It is made by needle punching process-intersperse the fiberglass in an orderly manner between the material layers,so that the felt layer has a three-dimensional porous three-dimensional structure.

It is used as the reinforced material in GMT and pultrusion products,and is popular with the Auto,FRP,Pultrusion and GMT fields.

Fiberglass Needle Mat Series:

Model   No.                      Weight                    Width          Net   Weight per Roll
(oz. per sq/ft)(grams per sq/m)(inch)(mm)(lb)(kg)
Use And Craftwork: GMT
Use And Craftwork: GMT
Use And Craftwork: Pultrusion


1. Three-dimensional structure

2. Needled with the chopped strand or continuous strand

3. It will be porous structure when heated. The structure avoids the defects caused by the air embedded into the products.

4. Evenly distribution makes sure the smoothness of the finished.

5. High tensile strength greatly increases the mechanical capability of the products.


GMT: Such as car bumper and engine board.


And is popular with the Auto,FRP

Packaging & label: 

Each roll is wrapped around a paper tube with an inner diameter of 76 millimeters(3 inches),completely wrapped in stretched film packaging.placed vertically or horizontally on each pallet,and wrapped in stretched film order to achieve 100% traceability ,the information is printed on the packaging film. Each roll has a label that provides a detailed description of the product specifications,product code,nominal weight,roll width,roll number and manufacturing date.Each pallet is identified by a pallet label including the date and the pallet weight.


Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.

+86 13951832169
Opening hours:
Mon. - Sar. 8:00 - 17:00
About us
Tiaming’s fiberglass products are widely used in FRP (GMT included), automotive interiors, electric field, gypsum, construction etc, and suitable for process of pultrusion, hand lay-up, winding, compression, RTM, vacuum infusion, preforming, injection, preforming, spray-up, etc.
Latest news
Sign up for our newsletter to receive the latest news.
​Copyright © Nanjing Tianming Fiberglass Products Co., Ltd. All Rights Reserved.