Home » All The Solutions » FRP » Boat » Fiberglass Composite Mat 520 gsm: Fiberglass Fabric 0° 90° and Polyester Surface Tissue

All The Solutions


Share to:
sharethis sharing button

Fiberglass Composite Mat 520 gsm: Fiberglass Fabric 0° 90° and Polyester Surface Tissue

E-glass, no binder, with surface mat
  • 520

  • Tianming

  • 70191500

Fiberglass Composite Mat:

 Fiberglass Fabric 0° 90° and Polyester Surface Mat 520 gsm


1.Isotropic and mechanical capabilities between continuous strand mats and chopped strand mats.

2.Well designed meet for different requirements.

3.Easily molding and excellent compatibility with resin.

4.Suits any requirements of FRP


Fiberglass composite mat has the characteristics of both continuous filament mats and chopped strand mats, which are flowing faster in layer resin and also with faster and well wet-out rate. Continuous/polyester veil composite mat has higher strength and more clear surface. These two kind mat are widely used in Pultrusion, RTM and also high requirements molding process.

Packaging & label: 

Each roll is wrapped around a paper tube with an inner diameter of 76 millimeters(3 inches),completely wrapped in stretched film packaging.placed vertically or horizontally on each pallet,and wrapped in stretched film packaging.in order to achieve 100% traceability ,the information is printed on the packaging film. Each roll has a label that provides a detailed description of the product specifications,product code,nominal weight,roll width,roll number and manufacturing date.Each pallet is identified by a pallet label including the date and the pallet weight.


Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.

+86 13951832169
Opening hours:
Mon. - Sar. 8:00 - 17:00
About us
Tiaming’s fiberglass products are widely used in FRP (GMT included), automotive interiors, electric field, gypsum, construction etc, and suitable for process of pultrusion, hand lay-up, winding, compression, RTM, vacuum infusion, preforming, injection, preforming, spray-up, etc.
Latest news
Sign up for our newsletter to receive the latest news.
​Copyright © Nanjing Tianming Fiberglass Products Co., Ltd. All Rights Reserved.