Density: | |
---|---|
material: | |
Color: | |
Binder: | |
Availability: | |
Quantity: | |
NMC250
Tianming
70191500
Fiberglass Chopped Strand Needle Mat 250 gsm
The fiberglass needle mat is a new type of fiberglass reinforced material for composite materials.
It is made by needle punching process-intersperse the fiberglass in an orderly manner between the material layers, so that the felt layer has a three-dimensional porous three-dimensional structure.It is used as the reinforced material in GMT and pultrusion products, and is popular with the Auto, FRP, Pultrusion and GMT fields.
Fiberglass Needle Mat Series:
Model No. | Weight | Width | Net Weight per Roll | Use And Craftwork | |||
(oz. per sq.ft) | (grams per sq.m) | (inch) | (mm) | (lb) | (kg) | ||
ENMC | 0.98-3 | 300-910 | 32-41 | 820-1250 | 88-110 | 40-50 | GMT |
ENMS | 0.98-3 | 300-910 | 32-41 | 820-1250 | 88-110 | 40-50 | GMT |
ENMS-P | 1.47-2.5 | 450-760 | 36-41 | 910-1250 | 55-66 | 25-30 | Pultrusion |
Capabilities:
1. Three-dimensional structure.
2. Needled by the chopped strand or continuous strand.
3. It will be porous structure when heated. The structure avoids the defects caused by the air embedded into the products.
4. Evenly distribution makes sure the smoothness of the finished.
5. High tensile strength greatly increases the mechanical capability of the products.
Application:
Fiberglass composite mat has the characteristics of both continuous filament mats and chopped strand mats, which are flowing faster in layer resin and also with faster and well wet-out rate. Continuous/polyester veil composite mat has higher strength and more clear surface. These two kind mat are widely used in Pultrusion, RTM and also high requirements molding process.
Packaging:
Each roll is wrapped around a paper tube with an inner diameter of 76 millimeters(3 inches), completely wrapped in stretched film packaging. placed vertically or horizontally on each pallet,and wrapped in stretched film packaging. in order to achieve 100% traceability, the information is printed on the packaging film. Each roll has a label that provides a detailed description of the product specifications, product code, nominal weight, roll width, roll number and manufacturing date. Each pallet is identified by a pallet label including the date and the pallet weight.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Chopped Strand Needle Mat 250 gsm
The fiberglass needle mat is a new type of fiberglass reinforced material for composite materials.
It is made by needle punching process-intersperse the fiberglass in an orderly manner between the material layers, so that the felt layer has a three-dimensional porous three-dimensional structure.It is used as the reinforced material in GMT and pultrusion products, and is popular with the Auto, FRP, Pultrusion and GMT fields.
Fiberglass Needle Mat Series:
Model No. | Weight | Width | Net Weight per Roll | Use And Craftwork | |||
(oz. per sq.ft) | (grams per sq.m) | (inch) | (mm) | (lb) | (kg) | ||
ENMC | 0.98-3 | 300-910 | 32-41 | 820-1250 | 88-110 | 40-50 | GMT |
ENMS | 0.98-3 | 300-910 | 32-41 | 820-1250 | 88-110 | 40-50 | GMT |
ENMS-P | 1.47-2.5 | 450-760 | 36-41 | 910-1250 | 55-66 | 25-30 | Pultrusion |
Capabilities:
1. Three-dimensional structure.
2. Needled by the chopped strand or continuous strand.
3. It will be porous structure when heated. The structure avoids the defects caused by the air embedded into the products.
4. Evenly distribution makes sure the smoothness of the finished.
5. High tensile strength greatly increases the mechanical capability of the products.
Application:
Fiberglass composite mat has the characteristics of both continuous filament mats and chopped strand mats, which are flowing faster in layer resin and also with faster and well wet-out rate. Continuous/polyester veil composite mat has higher strength and more clear surface. These two kind mat are widely used in Pultrusion, RTM and also high requirements molding process.
Packaging:
Each roll is wrapped around a paper tube with an inner diameter of 76 millimeters(3 inches), completely wrapped in stretched film packaging. placed vertically or horizontally on each pallet,and wrapped in stretched film packaging. in order to achieve 100% traceability, the information is printed on the packaging film. Each roll has a label that provides a detailed description of the product specifications, product code, nominal weight, roll width, roll number and manufacturing date. Each pallet is identified by a pallet label including the date and the pallet weight.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.