Phone:
+86 13951832169
 |
Share to:
Continuous Filament Mat for Electric Products
E-glass, continuous filament， powder binder, white.Electric Products
| Density: | |
|---|---|
| Quantity: | |
-
EMS150 ~ 900
-
Tianming
-
70191500
Continuous Filament Mat for Electric Products
Continuous filament mat is made of continuous fiberglass filament,The filaments are randomly distributed by free fall and then compacted by adhesive bonding. Continuous filament mats suitable for FRP process, for example, pultrusion process, RTM process, filament winding process, molding process and so on.The continuous filament mats are widely used in auto interior, such as sun visor, rear shelf, spare tire cover, fender, refrigerated car box, high voltage resistant insulation for transformers, reinforced profiles, reinforced windows and doors and so on. It also can be used as reinforced materials in GMT, asphalt linoleum, plastic floor geotextile. The reinforced products have high product strength smooth appearance and good moldability.
Fiberglass Continuous Filament Mat Series:
| Item | Weight (grams per sq.m) | Width: (mm) | Loss on Ignition | Moistrure | Net Weight per Roll | Use And Craftwork | ||
| PEMS | 150-450 | 1050-2300 | 4-10 | ≤0.20 | 30/35/45/50 | Pultrusion/winding | ||
| REMS | 300-450 | 1050-2300 | 2--4 | ≤0.20 | 30/35/45/50 | RTM/auto part | ||
| EEMS | 300-600 | 1050-2300 | 3--5 | ≤0.20 | 30/35/45/50 | Transformer | ||
| MEMS | 300-450 | 1050-2300 | 2--6 | ≤0.20 | 30/35/45/50 | Compression molding | ||
Capabilities:
1.Good strength and bending
2.Cleaning surface
3.Excellent heating resistance and well insulation
4.Not easily move, suit for injection molding
5.Excellent compatibility with resin. Conforms to pultrusion process.
6.Well designed meet for different requirements.
7.Easily molding and conforms to complex shapes.
Application:
Continuous filament mat is compatible with unsaturated polyester, epoxy, phenolics and polyurethane resin compatibility in unfilled or filled resin systems. It's suit for FRP process, for example pultrusion process, RTM process, filament winding process and the molding process. The Continuous filament mats is widely used in auto interior trimming, such as rear shelf, sun visor and rear tray assembly. It also can be used in insulation materials of transformer, the field of windows and other reinforce material.
Packaging & label:
Each roll is wrapped around a paper tube with an inner diameter of 76 millimeters(3 inches),completely wrapped in stretched film packaging.placed vertically or horizontally on each pallet,and wrapped in stretched film packaging.in order to achieve 100% traceability ,the information is printed on the packaging film. Each roll has a label that provides a detailed description of the product specifications,product code,nominal weight,roll width,roll number and manufacturing date.Each pallet is identified by a pallet label including the date and the pallet weight.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Continuous Filament Mat for Electric Products
Continuous filament mat is made of continuous fiberglass filament,The filaments are randomly distributed by free fall and then compacted by adhesive bonding. Continuous filament mats suitable for FRP process, for example, pultrusion process, RTM process, filament winding process, molding process and so on.The continuous filament mats are widely used in auto interior, such as sun visor, rear shelf, spare tire cover, fender, refrigerated car box, high voltage resistant insulation for transformers, reinforced profiles, reinforced windows and doors and so on. It also can be used as reinforced materials in GMT, asphalt linoleum, plastic floor geotextile. The reinforced products have high product strength smooth appearance and good moldability.
Fiberglass Continuous Filament Mat Series:
| Item | Weight (grams per sq.m) | Width: (mm) | Loss on Ignition | Moistrure | Net Weight per Roll | Use And Craftwork | ||
| PEMS | 150-450 | 1050-2300 | 4-10 | ≤0.20 | 30/35/45/50 | Pultrusion/winding | ||
| REMS | 300-450 | 1050-2300 | 2--4 | ≤0.20 | 30/35/45/50 | RTM/auto part | ||
| EEMS | 300-600 | 1050-2300 | 3--5 | ≤0.20 | 30/35/45/50 | Transformer | ||
| MEMS | 300-450 | 1050-2300 | 2--6 | ≤0.20 | 30/35/45/50 | Compression molding | ||
Capabilities:
1.Good strength and bending
2.Cleaning surface
3.Excellent heating resistance and well insulation
4.Not easily move, suit for injection molding
5.Excellent compatibility with resin. Conforms to pultrusion process.
6.Well designed meet for different requirements.
7.Easily molding and conforms to complex shapes.
Application:
Continuous filament mat is compatible with unsaturated polyester, epoxy, phenolics and polyurethane resin compatibility in unfilled or filled resin systems. It's suit for FRP process, for example pultrusion process, RTM process, filament winding process and the molding process. The Continuous filament mats is widely used in auto interior trimming, such as rear shelf, sun visor and rear tray assembly. It also can be used in insulation materials of transformer, the field of windows and other reinforce material.
Packaging & label:
Each roll is wrapped around a paper tube with an inner diameter of 76 millimeters(3 inches),completely wrapped in stretched film packaging.placed vertically or horizontally on each pallet,and wrapped in stretched film packaging.in order to achieve 100% traceability ,the information is printed on the packaging film. Each roll has a label that provides a detailed description of the product specifications,product code,nominal weight,roll width,roll number and manufacturing date.Each pallet is identified by a pallet label including the date and the pallet weight.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.