Continuous Filament Mat for Electric Products
Continuous filament mat is made of continuous fiberglass strand. It's non woven mat with powder binder.
Fiberglass Continuous Filament Mat Series:
|Model No.||Weight||Width||Loss on Ignition||Moistrure||Net Weight per Roll|
|(oz. per sq/ft)||(grams per sq/m)||(inch)||(mm)||(%)||(%)||(lb)||(kg)|
|Use And Craftwork: Pultrusion / Winding|
|Use And Craftwork: RTM / Automotive Parts|
|Use And Craftwork: Insulatin Material / Automotive Parts|
|Use And Craftwork: Compression Molding|
|Use And Craftwork: Common Type for RTM, Compress Molding And Automotive Parts|
1.Good strength and bending
3.Excellent heating resistance and well insulation
4.Not easily move, suit for injection molding
5.Excellent compatibility with resin. Conforms to pultrusion process.
6.Well designed meet for different requirements.
7.Easily molding and conforms to complex shapes.
Continuous filament mat is compatible with unsaturated polyester, epoxy, phenolics and polyurethane resin compatibility in unfilled or filled resin systems. It's suit for FRP process, for example pultrusion process, RTM process, filament winding process and the molding process. The Continuous filament mats is widely used in auto interior trimming, such as rear shelf, sun visor and rear tray assembly. It also can be used in insulation materials of transformer, the field of windows and other reinforce material.
Packed by rolls or by pieces (customized size).
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.