Chopped Strand Mat for General Purpose
Chopped strand mats are made of chopped strands of 50mm in length, which are randomly dispersed and bonded together by the polyester binder in powder or emulsion.
Fiberglass Chopped Strand Mat Series:
|Model No.||Weight||Width||Loss on Ignition||Moistrure Content||Net Weight per Roll|
|(oz. per sq.ft)||(grams per sq.m)||(inch)||(mm)||(%)||(%)||(lb)||(kg)|
|Use And Craftwork: Specialized for Automotive|
|Use And Craftwork: Specialized for Transformer|
|Use And Craftwork: Hand Lay-up / FRP|
|Use And Craftwork: Model|
1. Randomly dispersed and excellent mechanical properties.
2. Excellent compatibility with resin, cleaning surface, well tightness
3. Excellent heating resistance.
4. Faster and well wet-out rate
5. Easily fills mold and confirms to complex shapes
Chopped strand mats are mainly used in FRP fields, such as hand lay-up, filament winding and molding process. The typical products are panels, tanks, boats, automotive parts, cooling towers, pipes and so on!
Packed by rolls or by pieces (customized size).
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.