Home » All The Solutions » Process » Molding Process » Fiberglass Continuous Filament Mat for Molding Process

All The Solutions


Share to:

Fiberglass Continuous Filament Mat for Molding Process

E-glass, Continuous filament mat
  • EMS300

  • Tianming

  • 70191500

Fiberglass Continuous Filament Mat

Continuous filament mat is made of continuous fiberglass filament,The filaments are randomly distributed by free fall and then compacted by adhesive bonding. Continuous filament mats suitable for FRP process, for example, pultrusion process, RTM process, filament winding process, molding process and so on.The continuous filament mats are widely used in auto interior, such as sun visor, rear shelf, spare tire cover, fender, refrigerated car box, high voltage resistant insulation for transformers, reinforced profiles, reinforced windows and doors and so on. It also can be used as reinforced materials in GMT, asphalt linoleum, plastic floor geotextile. The reinforced products have high product strength smooth appearance and good moldability.

Fiberglass Composite Mat Series:

(grams per sq.m)
Loss on IgnitionMoistrureNet Weight per RollUse And Craftwork
REMS300-4501050-23002--4≤0.2030/35/45/50RTM/auto part
MEMS300-4501050-23002--6≤0.2030/35/45/50Compression molding



• Pultrusion

• Auto part

• Transformer

• Compression molding


1.Perfect tensile strength and bending strength;

2.Cleaning surface ,Anti-uv, anti-aging

3.Excellent chemical stability,heating resistance and well insulation;

4.Not easily move,suit for injection molding;

Packaging & label: 

Each roll is wrapped around a paper tube with an inner diameter of 76 millimeters(3 inches),completely wrapped in stretched film packaging.placed vertically or horizontally on each pallet,and wrapped in stretched film packaging.in order to achieve 100% traceability ,the information is printed on the packaging film. Each roll has a label that provides a detailed description of the product specifications,product code,nominal weight,roll width,roll number and manufacturing date.Each pallet is identified by a pallet label including the date and the pallet weight.


Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.

+86 13951832169
Opening hours:
Mon. - Sar. 8:00 - 17:00
About us
Tiaming’s fiberglass products are widely used in FRP (GMT included), automotive interiors, electric field, gypsum, construction etc, and suitable for process of pultrusion, hand lay-up, winding, compression, RTM, vacuum infusion, preforming, injection, preforming, spray-up, etc.
Latest news
Sign up for our newsletter to receive the latest news.
​Copyright © Nanjing Tianming Fiberglass Products Co., Ltd. All Rights Reserved.